Troubleshooting

Common issues and solutions for Engicam boards, flashing tools, and the Yocto build system.

• Boot

  Board does not boot, kernel panic, U-Boot errors.

  Go to section

• eMMC / SD Card

  Flashing failures, device not detected, partition errors.

  Go to section

• Network / SSH

  Cannot reach the board over the network or via SSH.

  Go to section

• Serial Console

  No output on the serial port, wrong baud rate, garbled text.

  Go to section

• UUU

  Board not detected by UUU, flashing errors, HID issues.

  Go to section

• Yocto Build

  Fetch errors, missing dependencies, build failures.

  Go to section